Double chain Electric window opener(BPDK)

Double chain Electric window opener(BPDK)

Operating instructions

1、 Product overview:

1.1 product introduction

The bpdk series double chain fire electric window opener produced by Hangzhou Bopan can be used in public places such as airports, hotels, exhibition centers, conference centers, stadiums, grand theaters, science and technology museums, shopping centers, factories and plants. Through the perfect combination with glass curtain walls and transparent roofs, it can effectively solve the problems of architectural beauty, practicality and strong permeability Energy saving and economy.

Bpdk series chain fire electric window opener is applicable to window types such as upper suspension external opening, upper suspension internal opening, lower suspension external opening, lower suspension external inverted, flat opening, sliding window and skylight.

1.1.1 performance introduction

※ exquisite appearance design, all aluminum alloy shell, with the characteristics of low energy consumption and maintenance free;

※ overload protection to prevent motor overload;

※ the chain is made of special materials (or optional stainless steel) with surface anti-corrosion treatment, which is suitable for long-term humid environment and requires less action and maintenance cost;

※ more than 30000 consecutive push out and pull back tests;

※ after closing, the locking force of the motor reaches 4000N;

1.1.2 model introduction

The model consists of enterprise name code, type code, travel code, etc.

Code provisions:

A. Enterprise code: BP - Hangzhou Bopan Intelligent System Co., Ltd;

B. Type code: DK - double chain electric window opener;

C. Stroke size: 500 - indicates opening stroke of 500mm;

1.2 Dimensions of bpdk series（24V/DC）

Comparison table between opening stroke and body length of double chain fire electric window opener:

1.3 Technical parameter

1.4 Component composition 

A. Double chain fire electric window opener B. bracket screw C. left bracket D. right bracket

E. Window sash connector F. nut g. screw

二、Installation and use:

2.1 Applicable window type installation diagram

2.2 Installation node drawing of window opener

2.3 Installation steps

◆

matters needing attention:

1. Before installation, push the window opener chain out for about 5cm to facilitate adjustment and installation.

2. Input 24V DC power supply for window opener, and do not connect power supply of other specifications.

3. The fuselage is installed in the middle, and the left and right distances are the same.

4. The chain shall be installed perpendicular to the window sash, otherwise the chain may be bent and the support force may be insufficient.

5. The above provides the general supporting support installation method. For the optional special support installation method, please consult the manufacturer's technicians, and we will serve you wholeheartedly.

2.4

Wiring instructions

Working power supply of window opener: DC24V / 1.2A

The opening / closing of the electric window can be controlled according to the wiring mode in the right figure

※ red wire connection + pole blue wire connection - pole window opening

※ red wire connection - pole blue wire connection + pole window closing

The polarity change of the output voltage is controlled through the on or off button on the fire electrical control device (fire electric window opener control equipment) bpfb-i, so as to change the forward rotation and reverse rotation of the motor, or the opening and closing action of the fire electric window opener is controlled through the external switch, which is connected with the fire electric gas control device (fire electric window opener control equipment)

The connection diagram is as follows: the specific number of window openers is based on the switches installed by the fire electric window opener control equipment

3、 Precautions

hot tip

1. Before use, please confirm that the power supply, connection and other matters meet the requirements of the manual. The wrong electrical connection will cause damage to the machine. All fire electric window openers produced by our company are powered by DC24V.

2. The windows must be closed in rainy days, and the electric window opener must not be exposed to rain.

3. When opening and closing the window, press the corresponding switch button for about 1s and release it without long pressing.

4. Use oily cleaner to clean the chain dust regularly. It is recommended to clean it once a month.

5. Regularly check the condition of fixing screws at all parts of the window opener. If they are loose, tighten them in time.

6. If the electric window opener operates abnormally, report for repair in time. Do not press the switch for many times. Depending on the load capacity provided by the power supply.

Double chain applicable window type