Chain electric window opener (BPLS)

BPLS chain fire electric window opener

Operating instructions

1.1 product introduction

The bpls chain fire electric window opener produced by Hangzhou Bopan can be used in public places such as airports, hotels, exhibition centers, conference centers, stadiums, grand theaters, science and technology museums, shopping centers, factories and plants. Through the perfect combination with glass curtain walls and transparent roofs, it can effectively solve the problems of beautiful, practical and strong permeability in buildings Energy saving and economy.

Bpls series chain fire electric window opener is applicable to window types such as upper suspension external opening, upper suspension internal opening, lower suspension external opening, lower suspension external inverted, flat opening, sliding window, skylight, etc.

1.1.1 performance introduction

※ exquisite appearance design, all aluminum alloy shell, with the characteristics of low energy consumption and maintenance free;

※ overload protection to prevent motor overload;

※ the chain is made of special materials (or optional stainless steel) with surface anti-corrosion treatment, which is suitable for long-term humid environment and requires less action and maintenance cost;

※ more than 30000 consecutive push out and pull back tests;

※ after closing, the locking force of the motor reaches 4000N;

1.1.2 model introduction

The model consists of enterprise name code, type code, travel code, etc.

Code provisions:

A. Enterprise code: BP - Hangzhou Bopan Intelligent System Co., Ltd;

B. Type code: LS - double chain electric window opener;

2、 Product parameters:

2.1 components:

Chain electric window opener body（ × (1 set)

Left and right fixing brackets（ × (1 pair)

Window sash connector（ × (1)

Bracket screw（ × 2 sets)

2.2Mounting screws:

2.3Overall dimension：

2.4Applicable window type

2.5Technical parameter：

三、Installation instructions：

matters needing attention:

1. Before installation, push the window opener chain out for about 5cm to facilitate adjustment and installation.

2. Input 24V DC power supply for window opener, and do not connect power supply of other specifications.

3. The chain outlet is installed in the middle of the window sash.

4. The chain shall be installed perpendicular to the window sash, otherwise the chain may be bent and the support force may be insufficient.

4、 Wiring instructions

Working power supply of window opener: DC24V / 1.2A

Connect with the fire electrical control device according to the wiring mode in the right figure to control the opening and closing of windows

※ the red line is connected to the power supply, the positive blue line is connected to the power supply, and the negative yellow line is connected to the communication positive

Send the control signal to the electric window opener through the on or off button on the fire electrical control device (fire electric window opener control equipment) bpfc, so as to change the forward and reverse rotation of the motor, or control the opening and closing action of the fire electric window opener through the external switch, The connection diagram with the fire electrical control device (fire electric window opener control equipment) is as follows: the specific number of window openers depends on the load capacity provided by the switching power supply configured by the fire electric window opener control equipment.

5、 Precautions

hot tip

1. Before use, please confirm that the power supply, connection and other matters meet the requirements of the manual. The wrong electrical connection will cause damage to the machine. All fire electric window openers produced by our company are powered by DC24V.

2. The windows must be closed in rainy days, and the electric window opener must not be exposed to rain.

3. When opening and closing the window, press the corresponding switch button for about 1s and release it without long pressing.

4. Use oily cleaner to clean the chain dust regularly. It is recommended to clean it once a month.

5. Regularly check the condition of fixing screws at all parts of the window opener. If they are loose, tighten them in time.

6. If the electric window opener operates abnormally, report for repair in time. Do not press the switch for many times.

Single chain opening mode diagram